Volume Control - Panasonic DBS 576 HD Technical Manual

Chapter 7. SLT Features
Hardware Requirements
• Need VB-44224, VB-44101
Related Programming
• N/A
Considerations
• The VB-44224 24-key telephone is required.
• You must pre-program the desired calling information into the telephone's Voice Recognition
Unit in order for the System to recognize the verbal commands.

Volume Control

Description
The System allows you to set different receiving volumes for the handset, speaker, intercom ring tone,
and incoming ring tone.
Operation
To adjust the volume while your phone is in use:
1. Press the VOLUME up or down arrow key:
• During ringing to adjust intercom or incoming ring tone
• During a call to adjust handset or speaker volume
To adjust ringer volume while your phone is idle:
1. Press the ON/OFF key.
2. Press the PROG key.
3. Enter 9, then 1 to adjust the incoming ring tone.
OR...
Enter 9, then 2 to adjust the intercom ring tone.
4. Press the VOLUME up or down arrow key to adjust the
loudness of the tone.
5. Press the ON/OFF key.
Hardware Requirements
• N/A
5-98
Action
Action
DBS 576HD (USA) issued September 2001
Section 700 - Operation
Result
Intercom dial tone
Result
Pseudo ring tone
576-50-700