Class Of Service - Extension (Station) Timers - Panasonic DBS 576 HD Technical Manual

Section 700 - Operation
Hardware Requirements
• N/A
Related Programming
• FF1-0-04: Class of Service Trunk/Tie
• FF1-0-11: Trunk-Trunk Restriction
Considerations
• N/A

Class of Service - Extension (Station) Timers

Prior to CPC Version 2.0, timers related to certain extension functions such as the Hold Recall Timer
were only available on a system-wide basis. Beginning with CPC Version 2.0 these extension
functions may continue to use the same system-wide timers or a newly added Station Timer Class
settings. Up to eight Station Timer Classes may be specified. Then an extension may be assigned a
Station Timer Class.
The following table shows the extension timers that may be assigned on a class basis.
Table 3-3. Station Timer Class
Number
1 Hold Recall Timer (KTEL)
2 Hold Recall Timer (SLT)
3 Transfer Recall Timer (KTEL and SLT)
4 Hold/Transfer Recall Ringing Timer
5 Call Park Recall Timer
6 Call Forward No Answer Timer (Day 1)
7 Call Forward No Answer Timer (Day 2)
8 Call Forward No Answer Timer (Night)
9 Floating Hold Recall Timer
Hardware Requirements
• N/A
Related Programming
• FF1-1-05: Station Timer Class Definitions
• FF3-0 (Extensions): Station Timer Class Assignments
Considerations
• N/A
576-50-700
Station Timer
DBS 576HD (USA) issued September 2001
Chapter 7. SLT Features
3-15