101
Description
Selection
Default
Programming
Conditions
Feature References
4-36
System Programming
4.3
Day / Night Service Switching Mode
This program is used to determine if night mode is automatic or
manual.
Manual / Auto (automatic)
Manual
1.
Enter 101.
Display: Day/Night Mode
2.
Press NEXT.
Display example: D/N Mode:Manual
3.
Keep pressing SELECT until the desired selection is
displayed.
4.
Press STORE.
5.
Press END.
• If automatic switching is assigned, day / night mode is switched at the
time programmed in [102] "Day / Night Service Starting Time."
• The operator can switch the day / night mode at any time.
Section 3, Features,
Night Service
System Programming