Panasonic DBS 576 HD Technical Manual page 130

Chapter 7. SLT Features
Operation
To make an outside call that requires an account code:
1. Lift the handset or press the ON/OFF key.
2. Enter the Verified Account ID code (default = 8#).
3. Enter the Account Code (10 digits max.).
4. Press the # key.
5. Press a vacant CO key or enter a trunk access code.
6. Dial the phone number.
Hardware Requirements
• An SMDR printer or external call accounting system is required to collect account code records.
Related Programming
• FF1-0-19: TRS Class for Forced Account Code
• FF1-2: Dial Plan
• FF3: Forced Account
• FF3: Verified Account
• FF8-1-04: Verified Account Codes with TRS Class
Considerations
• Account codes will be cancelled after using CO queuing.
• Account Codes interact with TRS as shown in the following table:
Forced or Not Forced
Not Forced
Forced
5-8
Action
Verified or
Non-Verified
Non-Verified Extension Port Based TRS
Verified
Non-Verified
Verified
DBS 576HD (USA) issued September 2001
Intercom dial tone
Enter Account # displays
Specified account code displays
Specified account code # displays
CO Key LED lights
Dialed phone number displays
TRS Class
No Account Entry
Class
TRS Class for Forced
Account Code
(FF1 0 19 0001)
Section 700 - Operation
Result
Account Entry
Extension Port Based TRS
Class
Account Code Based TRS
Class
Extension Port Based TRS
Class
Account Code Based TRS
Class
576-50-700