System Programming
4 3 0
Day /Night Service Switching Mode
Description
Selection
Default
Programming
Conditions
Feature References
This program is used to determine if night mode is set
automatically or manually.
Manual / Auto (automatic)
Manual
Enter 101.
1.
Display: 101 DAY/NT AUTO
2.
Press NEXT.
Display example: D/N Mode:Manual
Keep pressing SELECT until the desired selection is
3.
displayed.
4.
Press STORE.
Press END.
5.
If automatic switching is assigned, day / night mode is switched at the
l
time programmed in [ 1021 "Day / Night Service Starting Time".
The operator and manager can switch the day / night mode at any time.
l
Section 3, Features
Night Service
101
System Programming
4-33