Flash Send; Hot Line - Panasonic DBS 576 HD Technical Manual

Section 700 - Operation

Flash Send

Description
Flash send allows you to send a flash to a CO line.
Operation
To send a flash on a CO line:
1. Hookflash to place the current CO call on hold.
2. Enter the SLT Flash Send access code (default = 765).
Related Programming
• FF1-2: Dial Plan
• FF5-5: Hot Line
Considerations
• N/A

Hot Line

Description
Hot Line enables you to immediately connect to another pre-assigned extension or speed dial number
simply by lifting the handset. You do not have to dial any digits.
Operation
To immediately connect to a pre-assigned extension or speed dial number:
1. Lift the handset.
Related Programming
• FF1-2: Dial Plan
• FF5-5: Hot Line
Considerations
• N/A
576-50-700
Action
Action
DBS 576HD (USA) issued September 2001
Chapter 7. SLT Features
Result
Dial tone is returned
A flash is sent on the CO line. The CO
line will respond according.
Result
Automatically connected to pre-assigned
extension or speed dial number
7-27