Exclusive Hold - Panasonic DBS 576 HD Technical Manual

Chapter 7. SLT Features
To retrieve a call from Floating Hold:
1. (A) Press the FF key assigned to the Floating Hold orbit
number where the call is held.
OR...
(A) Enter the Floating Hold Pickup feature access code
(default = *9).
(B) Enter the Floating Hold orbit number 01-96 (CPC-96/
HS/HM) or 01-09 (CPC-96/HS/HM) (See considerations
below.)
Hardware Requirements
• N/A
Related Programming
• FF1-0-01: Floating Hold on HOLD Key
• FF1-0-02: Dial Control for Floating Hold Answer.
• FF1-2: Dial Plan
• FF4: FF-Key Feature Assignment
Considerations
• The number of floating hold orbits available may very depending on the Station Park/Floating
Hold Pickup setting (FF1-0-02-0025). The floating hold pickup access code can be set to *9
(default). The "*9" access code operates as follows:
System Size
96, 576HD

Exclusive Hold

With Exclusive Hold, only the extension that held the call can retrieve it. Exclusive Hold can be used
to hold CO calls and extension calls.
Operation
To place a call on Exclusive Hold:
1. While on a call, press the CO key used for the call or press
the HOLD key.
5-20
Action
Virtual Line Number and Operation
01-09 Floating Hold pick up
10-96: For Station Park Hold pick up purpose
Action
DBS 576HD (USA) issued September 2001
Section 700 - Operation
Result
CO XXX displays if line released (where
XXX = outside line number)
Result
• Intercom dial tone
• Hold CO XXX displays (where XXX
= outside line number)
576-50-700