Walking Trs Class Of Service - Panasonic DBS 576 HD Technical Manual

Section 700 - Operation

Walking TRS Class of Service

Description
Walking Toll Restriction Service (TRS) Class of Service (COS) allows an extension user to "carry"
his or her toll restrictions to another phone.
Before the Walking TRS COS feature can be used, a Walking TRS COS code must be entered at your
extension before using dialing privileges at another extension.
Operation
To use a Walking TRS COS code:
1. Lift the handset or press the ON/OFF key of an extension
other than your own.
2. Enter the Walking TRS Access code (default = 87).
3. Dial your extension number.
4. Enter your Walking TRS COS code (0001-9999).
5. Enter a trunk access code (9 or 81-84).
6. Dial the phone number.
7. Replace the handset or press the ON/OFF key.
Hardware Requirements
• N/A
Related Programming
• FF8-1-08: Walking TRS COS Code
Considerations
• The same Walking TRS COS code can be used on more than one extension.
• Walking TRS COS mode is kept until the user goes on-hook.
• ARS and TRS dialing privileges follow the Walking TRS COS.
• Before entering a new Walking TRS COS, you must first clear the existing code.
• When Walking TRS COS is used, Wxxxx (where xxxx is the user's extension number) appears
in SMDR.
576-50-700
Action
DBS 576HD (USA) issued September 2001
Chapter 7. SLT Features
Result
Intercom dial tone
Walking TRS COS remains in effect until
you replace the handset.
7-45