Panasonic DBS 576 HD Technical Manual page 265

Section 700 - Operation
To dial a PSD number by entering the speed dial bin number:
1. Lift the handset or press the ON/OFF key.
2. If necessary, access an outside line.
3. Press the AUTO key.
OR...
Enter the Speed Dial Originate code (default = 80).
4. Enter the PSD bin number (80-99).
5. Complete the call and replace the handset or press the ON/
OFF key.
To delete a PSD number:
1. Lift the handset or press the ON/OFF key.
2. Enter the Speed Dial Set/Clear code (default = 710).
3. Enter the PSD bin number (80-99).
4. Press the HOLD key.
5. Replace the handset or press the ON/OFF key.
Hardware Requirements
• N/A
Related Programming
• FF8-1: PSD Numbers
• FF8-1: PSD Names
Considerations
• Storing a new number erases any previously stored data.
• Speed Dial numbers can contain up to 24 characters. The following table reflects which keys to
use.
To indicate . . .
Digit or character
Intercom Level *
MCO Code **
Pause
DP - DTMF Code
SSD Code
576-50-700
Action
Action
Enter/Press
0, 1 - 9, *, #
AUTO * #
AUTO * 0
REDIAL
AUTO * *
AUTO NN(N)
DBS 576HD (USA) issued September 2001
Chapter 7. SLT Features
Result
Intercom dial tone
Outside dial tone
Result
Intercom dial tone
6-43