Offhook Voice Announce - Panasonic DBS 576 HD Technical Manual

Hide thumbs Also See for DBS 576 HD:
Table of Contents

Advertisement

Chapter 7. SLT Features
Operation
After receiving an offhook signal during a call:
1. Press the HOLD key.
2. Press the flashing FF key for the CO line of the incoming
call.
Note:
For details about handling multiple calls, see "Call Hold" on page 6-15.
Hardware Requirements
N/A
Related Programming
FF3: CO Off-Hook Signal.
Considerations
The CO call type may be either multiple ring, direct, or camp-on.
The system does not send the offhook signal under the following conditions:
• During a conference call
• During an OHVA or Busy override
• Data Privacy is enabled
• the receiving telephone is a 3rd party voice mail.

Offhook Voice Announce

Description
You can interrupt a busy extension when making an Intercom Call, and then use the Off-Hook Voice
Announce (OHVA) feature to make an announcement that only the called party can hear. You can also
transfer a held call to a busy extension after making the announcement using this feature.
To make an OHVA:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. Enter the OHVA feature access code (default = 8).
4. Make your announcement
6-36
Action
Action
DBS 576HD (USA) issued September 2001
Section 700 - Operation
Result
Result
Busy signal
576-50-700

Advertisement

Table of Contents
loading

Table of Contents