Panasonic DBS 576 HD Technical Manual page 107

Section 700 - Operation
Operation
To set the Special Day Modes:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 4-3.)
2. At the 81 level, enter 07.
3. Press the HOLD key.
4. Enter 1.
5. Press the HOLD key.
6. Press the HOLD key.
7. Enter the date by month (two characters) and day (two char-
acters) for the Special Day 1.
Note: To clear an entry or existing data, press the FLASH
key.
8. Press the HOLD key.
9. Enter the start time in hours (two characters) and minutes
(two characters) for mode 1.
Note: To clear an entry or existing data, press the FLASH
key.
10. Press the HOLD key.
11. Enter the desired mode for Special Day ( (0 - None, 1 -
Day 1, 2 - Day 2, 3 - Night, 4 - Night(1), 5 - Night (2)).
Note: To clear an entry or existing data, press the FLASH
key.
12. Press the HOLD key.
13. To set additional Special Day modes, press the volume up
or down key or press the HOLD key to move to the desired
mode.
14. Repeat steps 7-13 until all Special Day modes are set. (Up
to 20 special days may be entered.)
Note: The entry positions are listed in Table 4.
576-50-700
Action
DBS 576HD (USA) issued September 2001
Chapter 7. SLT Features
Result
81-
User MAINT displays
8107-
System Mode displays
1-
Mode Special Day displays
1000 :MMDD
Special Day 01 displays
1001 :HHMM
S Day 01-1 Start displays
1002 :
S Day 01-1 Mode displays
Next Special Day mode displays
4-25