Panasonic DBS 576 HD Technical Manual page 160

Chapter 7. SLT Features
To call a Primary Directory Number extension (NPDNs not called):
1. Lift the handset or press the ON/OFF key.
2. Dial the Direct Call to PDN access code (default = 766).
3. Dial the extension number.
To transfer a call to the Primary Directory Number extension (NPDNs not called):
1. Place the current call on hold.
2. Dial the Direct Call to PDN access code (default = 766).
3. Dial the extension number.
4. If desired, wait until the PDN Extension answers and intro-
duce the call.
5. Hang up.
To set Call Forwarding All, Busy, or No Answer for a PDN from an NPDN or PNPDN:
1. Press an NPDN (or PNPDN) key.
2. Dial the access code for Call Forwarding (Direct = 721),
(Busy = 722), (No Answer = 723).
3. Dial the Call Forward Destination extension number.
Note: FF1-0-03: NPDN and PNPDN Call Forwarding Programming Address
Hardware Requirements
• N/A
Related Programming
• FF4-0-: FF Keys (PDN and NPDN Assignment)
• FF1-2-01: Dial Plan (PDN/Extension Numbers)
Considerations
• A DN can be assigned as a member of a hunt group.
• DNs are not available for ISDN S-Point, pilot numbers of hunting groups, Voice Mail, ACD, API
and for the Attendant group.
• A PDN must be assigned to a telephone before a corresponding NPDN can be used.
• TRS Class and ARS Routing is determined on an extension port basis regardless of the DN
accessed.
• Busy Override is available to the PDN conversation, but not available to the NPDN conversation.
5-38
Action
Action
Action
DBS 576HD (USA) issued September 2001
Section 700 - Operation
Result
Intercom dial tone
The first available PDN key lights.
Result
Intercom dial tone
Dialed number displays
Result
Intercom dial tone
Dialed number displays
576-50-700