Panasonic DBS 576 HD Technical Manual page 98

Chapter 7. SLT Features
Operation
To set the Mode Schedule:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 4-3.)
2. At the 81 level, enter 07.
3. Press the HOLD key.
4. Press the HOLD key.
5. Press the HOLD key.
6. Enter the start time in hours (two characters) and minutes
(two characters) for the Pattern 1 - first mode.
Note: To clear an entry or existing data, press the FLASH
key.
7. Press the HOLD key.
8. Enter the desired mode for Pattern 1 - first (0 - None, 1 -
Day 1, 2 - Day 2, 3 - Night, 4 - Night (1), 5 - Night (2)).
Note: To clear an entry or existing data, press the FLASH
key.
9. Press the HOLD key to store the entry.
10. To set additional mode schedules, press the volume up or
down key or press the HOLD key to move to the desired
mode.
11. Repeat steps 6-10 until all patterns and modes are set.
(There are 3 total patterns with 5 start time/modes each.)
Note: Entry Positions are listed in Table 3 on page 4-17.
12. Press the AUTO key to exit the entry mode.
13. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
4-16
Action
DBS 576HD (USA) issued September 2001
Section 700 - Operation
Result
81-
User MAINT displays
8107-
System Mode displays
0-
Mode Schedule displays
000 :HHMM
PTN 1-1 Start T displays
001 :
PTN 1-1 Mode displays
Next pattern mode displays
Desired pattern mode displays
0-
Mode Schedule displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
576-50-700