Trunk Access; Direct Trunk Access - Panasonic DBS 576 HD Technical Manual

Section 700 - Operation
To set the Timed Reminder Call feature:
1. Lift the handset or press the ON/OFF key.
2. Enter the Timed Reminder Set code (default = *31).
3. Enter the time you want the Timed Reminder Call to sound.
(Enter the time in 24-hour format. For example, 0100 for 1
AM, 1300 for 1 PM.)
4. Replace the handset or press the ON/OFF key.
To cancel the Timed Reminder Call feature:
1. Lift the handset or press the ON/OFF key.
2. Enter the Timed Reminder Cancel code (default = *39).
3. Replace the handset or press the ON/OFF key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• An alarm tone (default = 60 seconds) will be issued at the specified time.
• An extension can have only one Reminder Call set at a time.
• To change the Reminder Call, simply enter a new time.
• If the extension is in use when the reminder call is scheduled, the reminder call is issued 3
minutes later.

Trunk Access

Description
The System supports the following ways to seize an idle trunk to make an outside call:
•

Direct Trunk Access

• MCO Trunk Access
Direct Trunk Access
Extensions can seize a specific trunk for outgoing calls. Extensions can also use Direct Trunk Access
to test trunks or to access data trunks.
576-50-700
Action
Action
DBS 576HD (USA) issued September 2001
Chapter 7. SLT Features
Result
Intercom dial tone
Result
Intercom dial tone
6-49