101
Day / Night Service Switching Mode
Description
Selection
Default
Programming
Conditions
Feature References
4-34
System Programming
4.3
System Programming
This program is used to determine if night mode is set
automatically or manually.
Manual / Auto (automatic)
Manual
1.
Enter 101.
Display: 101 DAY/NT AUTO
2.
Press NEXT.
Display example: D/N Mode:Manual
3.
Keep pressing SELECT until the desired selection is
displayed.
4.
Press STORE.
5.
Press END.
• If automatic switching is assigned, day / night mode is switched at the
time programmed in [102] "Day / Night Service Starting Time".
• The operator and manager can switch the day / night mode at any time.
Section 3, Features
Night Service