Panasonic DBS 576 HD Technical Manual page 200

Chapter 7. SLT Features
3. Press the AUTO key.
OR...
Enter the Speed Dial Originate code (default = 80).
4. Enter the PSD bin number (80-99).
5. Complete the call and replace the handset or press the ON/
OFF key.
To check a PSD number:
1. Lift the handset or press the ON/OFF key.
2. Press the CONF key.
3. Press the AUTO key.
4. Enter the PSD bin number (80-99).
5. If you want to check the next PSD number, press the HOLD
key.
6. Replace the handset or press the ON/OFF key.
To delete a PSD number:
1. Lift the handset or press the ON/OFF key.
2. (A) Press the PROG key.
(B) Press the AUTO key.
OR...
(A) Enter the Speed Dial Set/Clear code (default = 710).
3. Enter the PSD bin number (80-99).
4. Press the HOLD key.
5. Replace the handset or press the ON/OFF key.
Hardware Requirements
• N/A
Related Programming
• FF8-1: PSD Numbers
• FF8-1: PSD Names
Considerations
• PSD number can be dialed from One-Touch keys. (For additional information, see "One-Touch
Keys" on page 5-67.)
5-78
Action
Action
Action
DBS 576HD (USA) issued September 2001
Section 700 - Operation
Result
Result
Intercom dial tone
C displays
Programmed data displays
Result
Intercom dial tone
Cleared Spd Dial displays
576-50-700