Offhook Voice Announce - Panasonic DBS 576 HD Technical Manual

Section 700 - Operation
OR
1. Press and release the hook quickly (hookflash).
2. Press and release the hook quickly to go back to the
original call.
NOTE: The steps outlined above can be performed only when the necessary settings have been
programmed into the system.
Hardware Requirements
• N/A
Related Programming
• FF3: CO Off-Hook Signal
• FF1-1: Off-Hook Signal Timer
Considerations
• The CO call type may be either multiple ring, or DID/DIL whose destination is set to Auto camp-
on (Call Waiting).
• Offhook signaling is not supported for an ISDN terminal.
• The System does not send the offhook signal under the following conditions:
• During a conference call
• During an OHVA or Busy override
• Data Privacy is enabled
• Receiving telephone is a 3rd party voice mail.

Offhook Voice Announce

Description
You can interrupt a busy extension when making an Intercom Call, and then use the Off-Hook Voice
Announce (OHVA) feature to make an announcement.
Operation
To make an OHVA :
1. Lift the handset.
2. Dial the extension number.
3. Enter the OHVA Access code (default = 8).
4. Make your announcement
576-50-700
Action
Action
DBS 576HD (USA) issued September 2001
Chapter 7. SLT Features
Result
First call is placed on hold; incoming call
connects.
First call connects again.
Result
Busy signal
7-31