Trunk Direct Pickup - Panasonic DBS 576 HD Technical Manual

Chapter 7. SLT Features
Operation
To use Trunk Group Pickup:
1. Lift the handset or press the ON/OFF key.
2. Enter the Trunk Group Pickup code (default = 709).
3. Complete the call and replace the handset or press the ON/
OFF key.
Hardware Requirements
• N/A
Related Programming
• FF1-2: Dial Plan
• FF5-3: MCO-Inbound Trunk Group
Considerations
• N/A

Trunk Direct Pickup

Trunk Direct Pickup allows you to answer calls ringing on a specific trunk number.
Operation
To use Trunk Direct Pickup:
1. Lift the handset or press the ON/OFF key.
2. Enter the Trunk Direct Pickup code (default = *0).
3. Dial the number of the ringing or holding (system) trunk.
4. Complete the call and replace the handset or press the ON/
OFF key.
Hardware Requirements
• N/A
Related Programming
• FF1-2: Dial Plan
Considerations
• Calls in Exclusive Hold cannot be picked up.
5-26
Action
Action
DBS 576HD (USA) issued September 2001
Section 700 - Operation
Result
Intercom dial tone
Extension number or outside phone num-
ber displays
Result
Intercom dial tone
Outside number displays
576-50-700