Distinctive Ringing; Door Box - Panasonic DBS 576 HD Technical Manual

Section 700 - Operation

Distinctive Ringing

Description
Distinctive Ringing sets CO calls to ring with a distinctive ring based on the trunk. This "ring" also
identifies the call as an outside call instead of an inside call.
Beginning with CPC version 2.0, calls to a key telephone or DSLT can also be set to distinctive
ringing on an extension basis.
Hardware Requirements
• N/A
Related Programming
• FF2-0: (Trunks) Ring Pattern and Frequency
• FF3-0: (Extensions) Ring Pattern and Frequency
• FF1-0-04: (System) Trunk Class of Service
Considerations
• N/A

Door Box

Description
The door box (also called door phone) allows visitors to announce their presence from the office door,
etc. When the button on the door box is pressed, one or more phones ring in the System. When
answered, a two way conversation is made between the door box and the answering phone.
The answering party can operate a connected door opener (if equipped).
Operation
To answer a door box:
1. Answer the door box. (Door box calls ring in on a dedicated
FF key.)
2. Enter 3 while connected to the door box extension.
Hardware Requirements
• The door box requires a Door Box Adaptor (VB-43701), Door Box (VA-43705), and Door
Opener. Door openers are not sold by Panasonic; however, they can be purchased from an
electronics dealer.
• Up to 2 Door Boxes can be connected to a Door Box Adaptor and utilize the same trunk.
• The Door Opener can be set to open for 15 seconds, 30 seconds, or one minute.
576-50-700
Action
DBS 576HD (USA) issued September 2001
Chapter 7. SLT Features
Result
Two way conversation possible
Door unlocks
3-29