Section 700 - Operation
Attendant Group Calls
Description
You can call the attendant group from any extension by dialing the designated attendant number.
Operation
To call an attendant group:
1. Lift the handset or press the ON/OFF key.
2. Enter the attendant pilot number (default = 0).
Hardware Requirements
•
N/A
Related Programming
•
FF1-2: Dial Plan
•
FF3: Extension Number
•
FF5-0: Attendant Hunt Groups
Considerations
•
Up to 20 extensions can be included in an attendant group.
•
The attendant pilot number is flexible.
•
If a member of an attendant group is for a virtual extension, multiple extensions in the attendant
group can be made to ring at once when the virtual number is dialed.
Auto Repeat Dial
Description
If you press the REDIAL key while receiving busy tone on an outside call, the System automatically
redials the number. The System continues to redial the number at set intervals until the called number
answers, the caller hangs up, or the maximum of 15 redial attempts is made.
Operation
To use Auto Repeat Dial:
1. Press the ON/OFF key.
2. Press a vacant CO key or enter a trunk access code
576-50-700
Action
Action
DBS 576HD (USA) issued September 2001
Chapter 7. SLT Features
Result
Intercom dial tone
Call Attendant displays
Result
Intercom dial tone
CO Key LED lights
5-9