Set Message Key Id Code - Panasonic DBS 576 HD Technical Manual

Chapter 7. SLT Features
13. Repeat steps 8-12 until all extension names are entered.
14. Press the AUTO key to exit the entry mode.
15. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A

Set Message Key ID Code

Description
(For a description of the Message Key ID Code Feature, see "Message Key ID Code" on page 3-61.)
On a large display phone you can use a Message key to either retrieve voice mail messages or respond
to telephone messages. To respond to voice mail messages from a 3rd party voice mail system, you
need to set the Message Key ID code to identify the caller to the voice mail system. You can also use
the Message key to program a voice mail password.
Operation
To set the Message Key ID code:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 4-3.)
2. At the 81 level, enter 06.
3. Press the HOLD key.
4. Press the HOLD key.
5. Dial the extension number of the phone being programmed.
6. Press the HOLD key.
4-14
Action
Action
DBS 576HD (USA) issued September 2001
Section 700 - Operation
Result
Enter EXT # displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
Result
81-
User MAINT displays
8106-
MSG Key ID Code displays
MSGID-EXT Number displays
MSG-ID EXT XXX displays (where
XXX = extension number)
576-50-700