KYMCO People GT 200i Service Manual page 66

6. CYLINDER HEAD/VALVES
Tighten the four cylinder head nuts and the
four bolts between the cylinder head and
cylinder.
Torque:
Cylinder head nuts: 3.6 kgf-m (35.3 N-m)
Turn the A.C. generator flywheel so that the
"T" mark on the flywheel aligns with the index
mark on the right crankcase cover.
Keep the round hole on the camshaft gear
facing up and align two bolts on the camshaft
gear with the cylinder head surface (Position
the intake and exhaust cam lobes down.) and
install the cam chain over the camshaft gear.
• Apply engine oil to the threads of the
cylinder head cap nuts.
• Diagonally tighten the cylinder head
cap nuts in 2～3 times.
• First tighten the cylinder head cap nuts
and then tighten the bolts between the
cylinder and cylinder head to avoid
cracks.
Install the thermostat bolt.
Torque: 1.2 kgf-m (11.8 N-m)
Turn the cam chain tension screw counter-
clockwise to release it.
People GT 200i
Nuts
Camshaft Gear
Bolts
Round hole
6-10