KYMCO People GT 200i Service Manual page 87

8. DRIVE AND DRIVEN PULLEYS/
V-BELT
People GT 200i
CLUTCH ASSEMBLY
Clips
Install the damper rubbers on the drive plate
pins.
Install the clutch weights/shoes and clutch
springs onto the drive plate.
Install the retainer plate and secure with the
clips.
Movable Driven Face
Drive Plate
CLUTCH / DRIVEN PULLEY ASSEMBLY
Clean the pulley faces and remove any
grease from them.
Apply grease to the O-rings and install them
onto the moveable driven face.
8-10