3. INSPECTION/ADJUSTMENT
People GT 200i
CLUTCH SHOE WEAR
Start engine and check the clutch operation
by increasing the engine speed gradually.
If the motorcycle tends to creep or the engine
stop, check the clutch shoes for wear and
replace if necessary.
SUSPENSION
FRONT
Check the action of the front shock absorbers
by compressing them several times.
Check the entire shock absorber assembly
for oil leaks, looseness or damage.
REAR
Each shock absorber(4) on your scooter has
5 spring preload adjustment positions for
different load or riding conditions.
Use a pin spanner(5) to adjust the rear shock
spring preload. Position 1 is for light loads
and smooth road conditions. Position 3 to 5
increase spring preload for a stiffer rear
suspension and can be used when the
scooter is heavily loaded.
Be certain to adjust both shock absorbers to
the same spring preload positions.
3-10