KYMCO People GT 200i Service Manual page 63

6. CYLINDER HEAD/VALVES
Remove two nuts
upper/lower side of cylinder head.
Remove two bolts attaching to the cylinder
head.
Remove the cylinder head.
Remove the dowel pins and cylinder head
gasket.
Remove the cam chain guide.
Remove all gasket material from the cylinder
head mating surface.
Be careful not to drop any gasket
material into the engine.
CYLINDER HEAD DISASSEMBLY
Remove the valve spring cotters, retainers,
springs, spring seats and valve stem seals
using a valve spring compressor.
• Be sure to compress the valve springs
with a valve spring compressor.
• Mark all disassembled parts to ensure
correct reassembly.
Special
Valve spring compressor
Remove carbon deposits from the exhaust
port and combustion chamber.
6-7
attaching to the
E040
Nut
Bolts
Cylinder Head Gasket
Cam Chain Guide
Valve Spring Compressor
People GT 200i
Dowel pins