Vehicle Can Not Be Started - KYMCO People GT 200i Service Manual

Hide thumbs Also See for People GT 200i:
Table of Contents

Advertisement

5. FUEL INJECTION SYSTEM
. Vehicle can not be started – Handling method (Steps)
Preliminary Checking: 6 basic inspection
1. Is the battery with voltage (12 V or higher)
2. Key-On and listen for any action with Fuel Pump / Fuel Pump
Relay (It will turn off automatically in 5-10 seconds)
3. Key-On to check for any failure lamp light up on dashboard.
4. Is the Idle screw of Throttle Valve being changed or loose?
5. Has the vehicle under regular service? Is the gas station a good one?
6. Is the spark plug the correct model of specified by the vehicle
builder?

Vehicle can not be started?

Check for any Failure code. (Failure Lamp on / How to tell the Failure
code?
Turn on power to see if the engine inspection / failure lamp off?
If it flashes continuously or light up for long time, the vehicle is at
failure -
read the Failure Code?
Methods:
1. Reading DTC from speedometer, if PDA or diagnosis tool is not
available.
2. Reading DTC from Diagnosis tool, if it is available.
People GT 200i
13-40

Advertisement

Table of Contents
loading

Table of Contents