KYMCO People GT 200i Service Manual page 28

2
. EXHAUST MUFFLER/FRAME COVERS
People GT 200i
Side Cover
FLOOR-FOOT REMOVAL
Remove the screws attaching the right and
left side covers.
Remove the right and left side covers by
pulling them outward.
Screws
Disconnect the battery wire.
Remove the battery.
Battery
Battery Wire
Remove the floor mat.
Remove the center cover. ( 2-3)
Remove the four bolts attaching the
floorboard.
Remove the floorboard.
The installation sequence is the reverse of
removal.
Floorboard Bolts
LEG SHIELD REMOVAL
Screws
Remove the met-in box.
Remove the body cover.
Remove the floorboard.
Remove the front upper cover.
Remove the screws attaching the leg shield
low.
Disconnect the leg shield low with the cowl
under cover.
The installation sequence is the reverse of
removal.
Leg Shield Low
2-4