KYMCO People GT 200i Service Manual page 207

18. STARTING SYSTEM
STARTER MOTOR
REMOVAL
Before removing the starter motor, turn
the ignition switch OFF and remove the
battery ground. Then, turn on the ignition
switch and push the starter button to
make sure the starter motor can't
operate securely.
Remove the seat, met-in box and carrier.
Remove the body cover, center cover and
rear fender together.
Remove the nut goes to the starter relay and
relax cable band to disconnect the starter
motor cable.
Remove two start motor mounting bolts and
the motor.
18-3
Nut
Starter Motor Cable
Bolts
People GT 200i