KYMCO People GT 200i Service Manual page 197

16
. BATTERY/CHARGING SYSTEM
CHARGING COIL WIRE
Measure the resistance between each Yellow
wire terminals.
Standard: 0.4 ~ 0.6 Ω (20ºC/68ºF)
Disconnect the regulator/rectifier connector.
Check for continuity between each Yellow
wire terminal regulator/rectifier side and
ground.
There should be no continuity.
REMOVAL/INSTALLATION
Remove the side body cover.
Disconnect the regulator/rectifier connectors.
Remove the two bolts, regulator/rectifier.
Installation is in the reverse order of removal.
16-7
Regulator/Rectifier
Connectors
People GT 200i