Rear Brake - KYMCO People GT 200i Service Manual

Hide thumbs Also See for People GT 200i:
Table of Contents

Advertisement

15. REAR BRAKE/REAR FORK/REAR
WHEEL/REAR SHOCK ABSORBER

REAR BRAKE

REAR BRAKE CALIPER REMOVAL
First remove the exhaust muffler. ( 2-10)
Remove the rear brake fluid tube bolt and
disconnect the brake fluid tube.
Remove two bolts attaching the rear brake
caliper.
Remove the rear brake caliper.
When removing the brake fluid tube, use
shop towels to cover plastic parts and
coated surfaces to avoid damage.
INSPECTION
Inspect the brake pads and brake disk.
Measure the brake disk thickness.
Service Limit: 4.0 mm replace if below
Visually check the brake pad thickness and it
should not exceed the wear indicator mark.
DISASSEMBLY
Remove two brake pads dowel pins and three
bolts from the brake caliper.
Remove the brake pads.
15-3
Fluid Tube Bolt
Brake Caliper
Bolts
Dowel Pin
Brake Pads
People GT 200i
Brake Disk

Advertisement

Table of Contents
loading

Table of Contents