KYMCO People GT 200i Service Manual page 124

12
. COOLING SYSTEM
WATER PUMP/IMPELLER
INSTALLATION
When the mechanical seal is replaced, a
new seal washer must be installed to the
impeller.
Install the impeller onto the water pump
shaft.
Torque: 1.0~1.4 kgf-m (11.8 N-m)
The impeller has left hand threads.
Install two dowel pins and a new gasket.
Install the water pump cover and tighten
the 4 bolts.
Torque: 1.0~1.4 kgf-m (11.8 N-m)
Impeller
People GT 200i
Seal Washer (Porcelain)
Mechanical (Water) Seal
12-11