Front Wheel - KYMCO People GT 200i Service Manual

Hide thumbs Also See for People GT 200i:
Table of Contents

Advertisement

14. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
Lubricate the throttle grip front end with
grease and then install the throttle grip.
Connect the throttle cable to the throttle grip.
Install the right and left handlebar switches
and tighten the screws.
• Adjust the throttle grip free play to the
specified range of 2~6mm.
Install the front and rear brake master
cylinders.
• Install the brake master cylinders by
aligning the index marks.

FRONT WHEEL

REMOVAL
Disconnect the speed wire from the front right
suspension unit.
Remove the front axle to pull out the axle.
Remove the front wheel.
INSPECTION
AXLE RUNOUT
Set the axle in V blocks and measure the
runout using a dial gauge.
The actual runout is ½ of the total indicator
reading.
Service Limit: 0.2 mm replace if over
14-5
Throttle Cable
Throttle Grip
Bolt
Collar
Axle
Front axle
People GT 200i

Advertisement

Table of Contents
loading

Table of Contents