Installing The Speaker; Side Access Panel Sensor (Optional); Removing The Side Access Panel Sensor - HP Z800 Workstation Maintenance And Service Manual

4.

Installing the speaker

To install the speaker, reverse the removal steps.

Side access panel sensor (optional)

The side access panel sensor is a switch that detects when the side access panel is opened.
This section describes how to remove and install the side access panel sensor.

Removing the side access panel sensor

1.
2.
3.
ENWW
Downloaded from www.Manualslib.com
Disconnect the speaker cable from the inline front panel I/O cable
the chassis flanges as shown in the following figure.
2
Figure 5-12 Removing the speaker
Disconnect power from the workstation (see
Remove the side access panel (see
Remove the power supply from the chassis (see
manuals search engine
Predisassembly procedures on page
Removing the side access panel on page
Removing the power supply on page
Removing and installing components
, and slide the speaker from
76).
78).
83).
85