Creating Hp Backup And Recovery (Hpbr) Media - HP Z800 Workstation Maintenance And Service Manual

Creating HP Backup and Recovery (HPBR) media

NOTE:
on the Documentation and Diagnostics CD included with the workstation.
The Initial Recovery Point can be burned to optical media and used to recover a system. This section
describes making the media.
NOTE:
To create HPBR recovery media:
1.
2.
3.
4.
5.
6.
28 Chapter 3 Restoring the operating system
Downloaded from www.Manualslib.com
HPBR functionality is used with Windows XP only. For details, refer to the SoftThinks guide
The workstation must have a CD or DVD writer to create the media set.
The Initial Recovery Point was captured when the RestorePlus! media set was created previously.
If the IRP was not created, start the HP Backup and Recovery Manager and create recovery points
using the Expert mode. Follow the HPBR online documentation for instructions.
Burn the IRP to media from HPBR.
Select HPBR Start > All Programs > HP Backup & Recovery > HP Backup and Recovery
Manager.
Select Next at the first screen.
Select Create recovery CDs or DVDs to recover the system, and then select Next.
Choose Next to display a list of available CD image and the recovery points.
Check the box next to Initial Recovery Point, and then select Next.
Follow the instructions to create the media.
manuals search engine
ENWW