HP Z800 Workstation Maintenance And Service Manual page 139

9.
10.
ENWW
Downloaded from www.Manualslib.com
Carefully squeeze the green tabs
in the following figure .
2
Figure 5-68 Installing the drive in the optical bay bracket
Lift and hold the drive release latch at the green touch point
optical bay as shown in the following figure
release the latch, but continue to slide the bracket inward until the latch closes and engages the
bracket.
Figure 5-69 Installing the bracket in the optical bay
Repeat the steps above to install a second drive.
manuals search engine
while sliding the drive with rails into the drive bracket as shown
. When the front of the bracket is near its final position,
2
Removing and installing components 127
while sliding the bracket into the