Clearing Passwords; Chassis Security; Side Access Panel Key Lock; Side Access Panel Sensor (Smart Cover Sensor) (Optional) - HP Z800 Workstation Maintenance And Service Manual

Hide thumbs Also See for Z800 Workstation:
Table of Contents

Advertisement

Clearing passwords

If you forget the password, you cannot access the workstation.
For instructions about clearing passwords, see
on page

Chassis security

Side access panel key lock

The side access panel contains a key lock to prevent the panel from being removed.
The key is fastened to the workstation rear panel when shipped from the factory.

Side access panel sensor (Smart Cover Sensor) (optional)

The optional Side access panel sensor is a combination of hardware and software technology that can
alert you when the workstation side access panel has been removed (if the sensor has been configured
in the Computer Setup (F10) Utility).
The three levels of Side access panel sensor protection are shown in the following table:
Table 4-4
Level
Level 0
Level 1
Level 2
*
Side access panel sensor settings can be changed using the Computer Setup (F10) Utility.
60
Chapter 4 System management
Downloaded from
www.Manualslib.com
233.
Side access panel sensor protection levels
Setting
Description
Disabled
Side access panel sensor
Notify User
When the workstation restarts, a message appears indicating that the
workstation side access panel has been removed.
Setup Password
When the workstation is restarted, a message appears indicating that the
workstation side access panel has been removed. You must enter the setup
password to continue.
manuals search engine
Configuring password security and resetting CMOS
is disabled (default).
*
ENWW

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents