HP Z800 Workstation Maintenance And Service Manual page 119

7.
8.
ENWW
Downloaded from www.Manualslib.com
Connect the optical disk drive data cable to the system board connector as shown in the following
figure.
TIP: Route the data cable along the system board.
Figure 5-38 Connecting the data cable to the system board
NOTE: See Installing a hard disk drive in the slot load optical bay on page 118
a hard disk drive in the slot load optical bay.
Reassemble the workstation, and then replace the side access cover.
manuals search engine
if you are installing
Removing and installing components 107