Airflow guide
This section describes how to remove and install the chassis airflow guide.
Removing the airflow guide
1.
2.
3.
4.
ENWW
Downloaded from
www.Manualslib.com
Disconnect power from the workstation (see
Remove the side access panel (see
Remove the airflow guide by lifting firmly on the handle at the green touch point , and then rotating
the airflow guide upward
2
Figure 5-4
Releasing the airflow guide
Disengage the airflow guide tabs from the rear chassis slots
the chassis
as shown in the following figure.
2
Figure 5-5
Removing the airflow guide
manuals search engine
Predisassembly procedures on page
Removing the side access panel on page
as shown in the following figure.
78).
, and then lift the airflow guide from
Removing and installing components
76).
79