Removing A Dimm - HP Z800 Workstation Maintenance And Service Manual

Removing a DIMM

1.
2.
3.
4.
5.
ENWW
Downloaded from www.Manualslib.com
Disconnect power from the workstation (see
CAUTION: To ensure that DIMMs are not damaged during removal or installation, power off the
workstation and unplug the power cord from the AC power outlet. If you do not unplug the power
cord before installing memory, the modules might be damaged and the workstation will not
recognize the memory changes.
Remove the side access panel (see
Remove the airflow guide
Remove the memory fans (see
Carefully push outward on the memory slot socket levers
its socket as shown in the following figure.
2
Store the DIMM in an anti-static bag.
Figure 5-88 Removing a DIMM
manuals search engine
Predisassembly procedures on page
Removing the side access panel on page
(Removing the airflow guide on page
Removing the memory fans on page
78).
79).
139).
. Lift the DIMM straight up and out of
Removing and installing components 143
76).