Download  Print this page

Cpu Heatsink; Removing The Cpu Heatsink - HP Z800 Workstation Maintenance And Service Manual

Hide thumbs

Advertisement

CPU heatsink

This section describes how to remove and install a CPU heatsink.

Removing the CPU heatsink

1.
2.
3.
4.
5.
6.
ENWW
Downloaded from
www.Manualslib.com
Power down the workstation (see
Disconnect power from the workstation (see
Remove the side access panel (see
Remove the memory fans (see
Remove the airflow guide (see
Slowly and evenly loosen one pair of diagonally opposite screws
shanks disengage from the system board, and then loosen the remaining pair
following figure.
CAUTION:
Do not fully loosen one screw, and then move on to the next. Instead, loosen all
screws a little at a time, ensuring that the CPU remains level.
Figure 5-122
Loosening heatsink screws in sequence
manuals search engine
Predisassembly procedures on page
Predisassembly procedures on page
Removing the side access panel on page
Removing the memory fans on page
Removing the airflow guide on page
Removing and installing components 173
76).
76).
78).
139).
79).
from the CPU until the screw
as shown in the
2

Advertisement

Table of Contents

   Related Manuals for HP Z800 Workstation

Comments to this Manuals

Symbols: 0
Latest comments: