Installing The Slot Load Optical Disk Drive - HP Z800 Workstation Maintenance And Service Manual

Installing the slot load optical disk drive

1.
2.
3.
4.
ENWW
Downloaded from www.Manualslib.com
With power off and the side access panel open, remove the expansion card support and any card
cables that might interfere with slot load assembly installation.
Remove the airflow guide (see
Insert the optical disk drive in the carrier at an angle
Rotate the drive vertical, and then push it down until it snaps into place
Figure 5-34 Install the optical disk drive in the carrier
Connect the power/data cable to the optical disk drive.
TIP: Place excess cabling in the slot load optical bay.
Figure 5-35 Connecting the power/data cable to the drive
manuals search engine
Removing the airflow guide on page
.
Removing and installing components 105
79).
.
2