Saving And Printing Information In Hp Vision Field Diagnostics; Downloading The Latest Diagnostic Utility; Diagnostic Codes And Errors; Diagnostic Led And Audible (Beep) Codes - HP Z800 Workstation Maintenance And Service Manual

Saving and printing information in HP Vision Field Diagnostics

You can save the information displayed in the HP Vision Field Diagnostics Survey, History and Errors
tabs to a diskette or a USB flash drive. You can not save to the hard drive. The system will automatically
create an html file that has the same appearance as the information displayed on the screen.
1.
2.
3.
4.

Downloading the latest diagnostic utility

Follow these steps to download the latest diagnostic utility:
1.
2.
3.
4.
5.
6.
7.
8.

Diagnostic codes and errors

This section presents diagnostic LED codes, LED color definitions, and POST error messages to help
you troubleshoot problems. It includes these topics:
Diagnostic LED and audible (beep) codes on page 212
LED color definitions on page 216
POST error messages on page 217

Diagnostic LED and audible (beep) codes

This section describes the front panel LED error and operation codes as well as the audible codes that
might occur before or during the POST.
212 Chapter 6 Diagnostics and troubleshooting
Downloaded from www.Manualslib.com
Insert a diskette or USB flash drive if running HP Vision Field Diagnostics from CD.
Click Save in the bottom on any of the Survey, History or Errors tabs. All three log files will be saved
regardless of from which tab the Save button was clicked.
Select the drive onto which you will save the log files and click the Save button. Three html files
will be saved to the inserted diskette or USB flash drive.
NOTE: Do not remove the diskette or USB key until you see a message indicating that the html
files have been written to the media.
Print the desired information from the storage device used to save it.
NOTE: To exit HP Vision Field Diagnostics, click the Exit Diagnostics button at the bottom of
the screen. Be sure to remove the USB flash drive or CD from the optical drive.
Go to http://www.hp.com.
Select the Support & Drivers link.
Select the Download driver and software radio button.
Enter your product number (for example,
Select your operating system.
Select the Diagnostic link.
Locate HP Vision Field Diagnostics and select Download.
After the .iso file is downloaded, use CD-ROM burning software to copy the .iso file to an optical
medium.
Topics
manuals search engine
800) in the text box, and then press Enter.
ENWW