HP Z800 Workstation Maintenance And Service Manual page 176

8.
9.
164 Chapter 5 Replacing components
Downloaded from www.Manualslib.com
Insert the LCS assembly into the chassis through the rear system fan opening, from the rear of the
chassis as shown in the following figure.
Figure 5-110 Inserting the LCS assembly
Install the LCS cold plates.
a. Remove the plastic cover from the bottom of each cold plate as shown in the following figure.
Figure 5-111 Removing the protective cap
b. Apply thermal compound to the top CPU surface (see
on page 175).
manuals search engine
Installing the CPU heatsink
ENWW