Installing A Liquid Cooling Solution - HP Z800 Workstation Maintenance And Service Manual

Installing a liquid cooling solution

1.
2.
3.
4.
5.
6.
162 Chapter 5 Replacing components
Downloaded from www.Manualslib.com
Disconnect power from the system
access panel (Removing the side access panel on page
Remove the expansion card support (see
Remove the airflow guide (see
Remove the rear system fan assembly from the chassis (see
assembly on page 133). Set aside the mounting screws for later reuse.
Remove the CPU heatsinks (see
Attach the LCS radiator to the rear system fan assembly.
a. Align the radiator with the holes in the rear system fan mounting plate.
b. Fasten the radiator to the rear system fan mounting plate with four screws as shown in the
following figure.
Figure 5-108 Attaching the LCS radiator
manuals search engine
(Predisassembly procedures on page
78).
Removing the expansion card support on page
Removing the airflow guide on page
Removing the CPU heatsink on page
76) and remove the side
79).
Removing the rear system fan
173).
80).
ENWW