Installing a hard disk drive
1.
2.
3.
4.
ENWW
Downloaded from
www.Manualslib.com
Disconnect power from the workstation (see
Remove the side access panel (see
Select the proper drive bay (SATA or SAS) in which to install the drive. Use the hard disk drive
installation order shown in the following figure.
Figure 5-41
Selecting a drive bay
If there is a drive carrier in the drive slot, press the hard drive carrier release latch at the green
touch point and rotate the handle outward
shown in the following figure
Figure 5-42
Removing the drive carrier from the chassis
manuals search engine
Predisassembly procedures on page
Removing the side access panel on page
. Pull the drive carrier out of the hard drive bay as
.
2
Removing and installing components 111
76).
78).