Front Panel I/O Cable Assembly; Removing The Front Panel I/O Cable Assembly - HP Z800 Workstation Maintenance And Service Manual

Front panel I/O cable assembly

This section describes how to remove and install a front panel I/O cable assembly.

Removing the front panel I/O cable assembly

1.
2.
3.
4.
5.
6.
7.
ENWW
Downloaded from www.Manualslib.com
Disconnect power from the workstation
Remove the side access panel (see
Remove the expansion card support. (see
Remove the expansion card guide/front fan holder (see
fan holder on page 129).
Remove the right side panel (see
Remove the front bezel (see
Disconnect the front panel I/O cable assembly cables from the system board as shown in the
following figure.
Figure 5-16 Disconnecting the front panel I/O cable assembly cables
Item Description
1 Front audio
2 Front 1394a
3 Front USB
manuals search engine
(seePredisassembly procedures on page 76
Removing the side access panel on page
Removing the expansion card support on page
Removing the right side panel on page
Removing the front bezel on page
Removing and installing components
78).
Removing the expansion card guide/front
83).
88).
).
80).
89