Table of Contents
Advertisement
Preface
This chapter discusses the revisions made to this publication, describes how to get the latest version
of this publication, the conventions used in this guide, and related documentation.
Cisco documentation and additional literature are available on a CD-ROM, which ships with your
product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated
monthly; therefore, it might be more up to date than printed documentation. To order additional
copies of the Documentation CD-ROM, contact your local sales representative or call customer
service. The CD-ROM is available as a single item or as an annual subscription. You can also access
Cisco documentation on the World Wide Web at http://www.cisco.com,
http://www-china.cisco.com, or http://www-europe.cisco.com.
If you are reading Cisco product documentation on the World Wide Web, you can submit comments
electronically. Click Feedback on the toolbar and select Documentation. After you complete the
form, click Submit to send it to Cisco. We appreciate your comments.
Document Objectives
This configuration guide explains the initial and basic software configuration procedures for the
Cisco AS5300 Universal Access Server. The guide contains procedures for running the setup script
for various Cisco IOS software versions, manually configuring the access server, setting up basic
security, managing modems, and how to use the ROM monitor.
After completing the basic configuration procedures covered in this guide, you can then use the
appropriate companion publications to more completely configure your system. For information on
other publications available, see the section "Related Documentation."
Changes to This Guide
New/Changed Feature
Setup script for Cisco IOS Release 12.02(XD)
Serial interfaces for WAN support
BERT
Description
The setup script has been updated to reflect the changes
for the Cisco IOS Release 12.02(XD).
Procedures include how to enable the serial interface,
specify IP routing, and set up external clock timing on a
DCE or DTE interface.
Briefly describes the Bit Error Rate Tester (BERT)
feature used to test T1 or E1 links.
Preface ix
Advertisement
Table of Contents
