Selecting Finishing Settings - Oce CS240 Operation Manual

Copy operations

Hide thumbs Also See for CS240:

Table of Contents

Selecting finishing settings

Various settings can be selected for sorting and finishing copies fed into the copy output tray.

As the factory default, "Group" is selected.

If no finisher is installed and all of the following conditions are met, printed copies are fed out and sorted

in an alternating crisscross pattern.

A4- or B5-size paper is used.

Paper of the same size and type is loaded with the w orientation in one paper tray and with the v

orientation in another tray.

The "Auto" Paper setting is selected.

The "Auto" Paper setting is not selected when the "Mixed Original" setting is selected.

From Administrator Settings mode, the machine can be set so that copies are fed out without being

shifted when the finisher is installed. As a factory default, the machine is set to shift the copies that are

For details on specifying settings for shifting copies that are fed out when the finisher is installed, refer

to "System settings" on page 13-22.

CS240: For details on "Fold/Bind", refer to "Selecting a folding setting" on page 4-71.

CS231 For details on "Fold/Bind" and "Center Staple / Fold", refer to "Selecting a folding setting" on

The following Finishing settings are available.

Select this setting to separate each set of a multi-page document.

Select this setting to separate the copies of each page in a multi-page docu-

Basic copy operations