Auto Tray Switch Feature; Order For Selecting Paper Trays - Oce CS240 Operation Manual

Copy operations

Hide thumbs Also See for CS240:

Table of Contents

Auto tray switch feature

If the selected paper tray runs out of paper while a job is being printed and a different paper tray is loaded

with paper meeting the following conditions, the other paper tray is automatically selected so printing can

continue. If the optional LCT is installed, a maximum of 6,650 copies (with A4 v paper) can be made

continuously. (The paper tray is automatically switched only if the "Auto Tray Switch ON/OFF" parameter in

the Utility mode is set to "Allow".)

Operating conditions

The paper is the same size.

The paper is positioned in the same orientation.

The paper is the same type.

The paper trays are selected when the paper tray is automatically switched.

For details on the specifying the paper trays that are selected when the paper tray is automatically

switched, refer to "System settings" on page 13-22.

As a factory default, when a different paper tray is automatically selected, the next paper tray in the following

list is chosen.

Tray 1 % Tray 2 % Tray 3 % Tray 4 % LCT*

* Appears only when the optional LCT is installed.

To change the order in which the paper trays are selected, refer to "System settings" on page 13-22.

Copy paper/original documents