Table of Contents
Advertisement
Basic copy operations
Selecting the output tray (CS231)
0
The output tray can be selected only if optional finisher FS-519 is installed.
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Touch [Output Tray].
3
Select the output tray where copies are to be fed, and then touch [OK].
The Basic screen appears again.
Stapling copies ("Staple" settings)
Reminder
Copies can be fed out stapled either in the corner or at two places only when the finisher is installed.
CS240/CS231
4
4-65
Advertisement
Table of Contents
Troubleshooting
